Aller au contenu principal

Disassembling Marshall MS-2 Micro Amp Case Disassembly

Ce dont vous avez besoin

  1. Disassembling Marshall MS-2 Micro Amp Case Disassembly, Disassembling Marshall MS-2 Micro Amp Case Disassembly: étape 1, image 1 de 1
    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

  2. Disassembling Marshall MS-2 Micro Amp Case Disassembly: étape 2, image 1 de 3 Disassembling Marshall MS-2 Micro Amp Case Disassembly: étape 2, image 2 de 3 Disassembling Marshall MS-2 Micro Amp Case Disassembly: étape 2, image 3 de 3
    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

  3. Disassembling Marshall MS-2 Micro Amp Case Disassembly: étape 3, image 1 de 2 Disassembling Marshall MS-2 Micro Amp Case Disassembly: étape 3, image 2 de 2
    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

  4. Disassembling Marshall MS-2 Micro Amp Case Disassembly: étape 4, image 1 de 1
    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

MacKinley

Membre depuis le 10/22/13

811 Réputation

5 tutoriels rédigés

Équipe

University of Maryland, Team 1-1, Shastany Fall 2013 Membre de l'équipe University of Maryland, Team 1-1, Shastany Fall 2013

UMD-SHASTANY-F13S1G1

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 10

Total : 2,074