Pièces

Aucune pièce nécessaire.

First be sure to turn the power switch to the off position.
  • First be sure to turn the power switch to the off position.

  • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

Ajouter un commentaire

Now remove the battery.
  • Now remove the battery.

  • On the back of the device locate the battery cover.

  • Remove it by pushing down on the clip.

  • Then pull the piece of fabric until the battery comes out.

Ajouter un commentaire

  • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

  • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

Ajouter un commentaire

  • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

Ajouter un commentaire

  • Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.

Ajouter un commentaire

  • Remove the 7/16" phillips head screw.

Ajouter un commentaire

  • Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

MacKinley

Membre depuis le 22/10/2013

651 Réputation

5 tutoriels rédigés

Équipe

University of Maryland, Team 1-1, Shastany Fall 2013 Membre de l'équipe University of Maryland, Team 1-1, Shastany Fall 2013

UMD-SHASTANY-F13S1G1

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 14

Total : 949