Réparez vos affaires

Droit à la réparation

Boutique

Disassembling Mercedes W123 Glove Box Liner

Rédigé par : Nicolas Siemsen (et un autre contributeur)
  • Commentaires : 0
  • Favoris : 4
  • Réparations terminées : 3

Difficulté

Facile

Étapes

7

Temps nécessaire

15 minutes

Sections

1

Drapeaux

0

Introduction

There are a lot of items behind the dash board of a W123 that may eventually need service, anything from various relays, to one of several vacuum actuators for the climate control vents and flaps.

One way to get easier access to several of these parts is to remove the glove box liner. Learn how here.

Outils

Acheter ces outils

Pièces

Aucune pièce spécifiée.

  1. Start by opening the glove box.

    • Start by opening the glove box.

    Modifier

  2. Remove the two phillips screws in the glove box door catch, then remove it. Remove the two phillips screws in the glove box door catch, then remove it.

    • Remove the two phillips screws in the glove box door catch, then remove it.

    Modifier

  3. Gently pry apart the expansion plug in the glove box clips. There will be a row of them on top, and on the bottom. Once you've pried it out part of the way you can pull it the rest of the way out by hand, or gently with needle nose pliers.

    • Gently pry apart the expansion plug in the glove box clips. There will be a row of them on top, and on the bottom.

    • Once you've pried it out part of the way you can pull it the rest of the way out by hand, or gently with needle nose pliers.

    Modifier

  5. You can then pry the clips out of the liner. Remove them all.

    • You can then pry the clips out of the liner. Remove them all.

    Modifier

  6. Gently pry down the cover for the glove box lamp.

    • Gently pry down the cover for the glove box lamp.

    Modifier

  7. Now unplug the two connections from the lamp and remove the lamp housing.

    • Now unplug the two connections from the lamp and remove the lamp housing.

    • Be sure to make note of the orientation of the two wires for re-installation.

    Modifier

  8. Now the glove box liner will pull out by hand.

    • Now the glove box liner will pull out by hand.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Nicolas Siemsen

Membre depuis le 06/12/2013

35 072 Réputation

79 tutoriels rédigés

Badges: 30

+ 27 badges supplémentaires

Équipe

Master Techs Membre de l'équipe Master Techs

Community

295 membres

963 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 11

7 derniers jours : 50

30 derniers jours : 144

Total : 8,161