Aller au contenu principal

Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis

Ce dont vous avez besoin

  1. Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Remove serial port connection: étape 1, image 1 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Remove serial port connection: étape 1, image 2 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Remove serial port connection: étape 1, image 3 de 3
    • Loosen the screws on the serial port by turning them counter clockwise by hand.

    • After loosening the screws, pull the serial port out.

  2. Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Remove Lid: étape 2, image 1 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Remove Lid: étape 2, image 2 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Remove Lid: étape 2, image 3 de 3
    • Lift lid to its vertical position.

    • Pull lid straight up to remove it from the scanner.

  3. Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Detach plastic latches: étape 3, image 1 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Detach plastic latches: étape 3, image 2 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Detach plastic latches: étape 3, image 3 de 3
    • Push the plastic opening tools into the crack between the top and the bottom of the chassis.

  4. Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Continue latch detachment: étape 4, image 1 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Continue latch detachment: étape 4, image 2 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Continue latch detachment: étape 4, image 3 de 3
    • After placing one plastic opening tool into the slit, slide other plastic opening tools along the slit to detach the top from the bottom of the chassis.

    • Go all the way along the chassis until you can lift the upper lid.

  5. Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Fully remove the upper lid: étape 5, image 1 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Fully remove the upper lid: étape 5, image 2 de 3 Disassembling Microtek ScanMaker 5900 Outer Scanner Chassis, Fully remove the upper lid: étape 5, image 3 de 3
    • Do not fully remove the lid until you remove the ribbon cable attached to the front of the upper lid.

    • Do this by grabbing the upper lid from the sides and rotating it ninety degrees so it is perpendicular to the bottom lid.

    • Grab the ribbon cable and gently pull it out of its slot with your fingers.

    • The upper lid can now safely be removed from the bottom lid.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Taylor Nesheim

Membre depuis le 10/11/11

59 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 6-9, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 6-9, Regan Fall 2011

CPSU-REGAN-F11S6G9

2 membres

22 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 10

Total : 1,943