Introduction

This guide details how to remove the logic board.

  1. Slide the notch downward while pulling the back cover off to remove it.
    • Slide the notch downward while pulling the back cover off to remove it.

    Ajouter un commentaire

  2. Use your fingers to push the battery upward from the bottom.
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

    Ajouter un commentaire

    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

    Ajouter un commentaire

    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

    Ajouter un commentaire

    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

    Ajouter un commentaire

    • Carefully pry off the connection between the headphone jack and logic board.

    Ajouter un commentaire

    • Lift the first logic board off of the rest of the device.

    Ajouter un commentaire

    • Gently lift the second logic board from the rest of the device.

    • DO NOT force the board straight off as it could damage the ribbon cable!

    Ajouter un commentaire

    • Using tweezers, carefully pull off the connector shown.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

Membre depuis le 14/04/2010

7 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 29-61, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 892