Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Make sure device is unplugged before proceeding. This Prerequisite Only guide is necessary for all replacements.

Pièces

Aucune pièce spécifiée.

  1. Press in the mounting clips on each side of the case to remove the camera from the mount.
    • Press in the mounting clips on each side of the case to remove the camera from the mount.

  2. Using a Philips #0 screwdriver, remove the four 3 mm screws. Using a Philips #0 screwdriver, remove the four 3 mm screws.
    • Using a Philips #0 screwdriver, remove the four 3 mm screws.

  3. Lift the front of the case slowly, as there is an antenna cable attached to the motherboard. Carefully disconnect the antenna cable from the motherboard. You will feel this cable "pop" out of place when disconnected.
    • Lift the front of the case slowly, as there is an antenna cable attached to the motherboard.

    • Carefully disconnect the antenna cable from the motherboard. You will feel this cable "pop" out of place when disconnected.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Foens

Membre depuis le 03/09/2015

839 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team 15-4, Blackwell Fall 2015 Membre de l'équipe USF Tampa, Team 15-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G4

3 membres

12 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 68