Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Loosen the two screws on the battery panel. Then lift the panel up to remove it.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
L Button.
-
Top of the battery pack.
-
To remove the battery pack, place your fingernail or a spudger at the top of the battery near the L button. Gently lift the battery out.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove 4 Phillips screws from the board.
-
Lift the main board from the bottom end and flip it over to reveal the last connector.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the ribbon cable by gently using a plastic opening tool to flip up the black connector latch. The cable should easily slide out from the connector.
-
The motherboard should now be free from the rest of the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
A/B/X/Y button assembly
-
Select/Start button assembly
-
D-pad
-
Power button
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the plastic buttons and keep them in a safe place.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip the case open, and push the lower screen assembly out of the frame.
-