Aller au contenu principal

Introduction

This guide will show you how to remove the LCD Display from the Nokia 3560.

Pièces

Aucune pièce spécifiée.

  1. Press down on the release latch on the bottom of the cover. Once the latch is released, lift the cover from the phone.
    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

  2. Lift the front case off of the phone body.
    • Lift the front case off of the phone body.

  3. Lift the keypad off of the phone. Lift the keypad off of the phone.
    • Lift the keypad off of the phone.

  4. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  5. The screen is held to the body by six screws.
    • The screen is held to the body by six screws.

  6. Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).
    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

  7. Insert a flat screwdriver between the black body and plastic layer. Insert a flat screwdriver between the black body and plastic layer.
    • Insert a flat screwdriver between the black body and plastic layer.

  8. Pry the layers apart. The LCD and plastic layer will lift out as one piece.
    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Ryan

Membre depuis le 18/04/2010

1 Réputation

8 tutoriels rédigés

Équipe

Cal Poly, Team 30-39, Garner Spring 2010 Membre de l'équipe Cal Poly, Team 30-39, Garner Spring 2010

CPSU-GARNER-S10S30G39

5 membres

16 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,869