Pièces

Aucune pièce nécessaire.

  1. Press down on the button located at the bottom of the phone, using the center ridge as a guide.
    • Press down on the button located at the bottom of the phone, using the center ridge as a guide.

    • Pull the phone apart from the bottom, keeping the button pressed down.

    • CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.

    Ajouter un commentaire

  2. Remove the back cover to expose the battery.
    • Remove the back cover to expose the battery.

    Ajouter un commentaire

    • Place a finger or plastic opening tool in the gap between the battery and the phone.

    • Gently lift the battery out.

    Ajouter un commentaire

    • Locate the plastic latches on the left and right sides of the phone.

    • Insert the plastic opening tool or a fingernail into each latch and pry them open individually.

    • CAUTION! Some force is required.

    Ajouter un commentaire

  3. Livraison gratuite pour les commandes de plus de 20 $
    Indiquez le code BLUEANDBLACK au moment de payer
    Livraison gratuite pour les commandes de plus de 20 $
    Indiquez le code BLUEANDBLACK
    • Remove the faceplate with the number pad attached.

    Ajouter un commentaire

    • Turn the faceplate so the number pad faces downward.

    • Lift the number pad out of the faceplate.

    Ajouter un commentaire

    • Locate the six screws positions along the edges of the motherboard.

    • Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).

    • CAUTION! Place the screws in a secure location.

    Ajouter un commentaire

    • Locate the orange ribbon tape connecting the metal display plate to the motherboard.

    • Lift the black latch attaching the tape to the motherboard.

    • Gently pull the tape out of the latch slot to remove the metal display.

    Ajouter un commentaire

    • Using the plastic opening tool, gently pry off the motherboard from the plastic shell.

    • CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.

    Ajouter un commentaire

    • Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.

    • Gently pull the tape up to remove the display.

    Ajouter un commentaire

    • Locate the camera component in the plastic shell removed from underneath the motherboard (It is one piece).

    • Gently pull out the camera component using either a finger or plastic opening tool.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ian VanZandt

Membre depuis le 14/02/2012

600 Réputation

5 tutoriels rédigés

Équipe

James Madison, Team 3-1, Klein Spring 2012 Membre de l'équipe James Madison, Team 3-1, Klein Spring 2012

JMU-KLEIN-S12S3G1

3 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 821