Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the grip through the opening.
-
The grip is connected in the middle and is one piece.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
While pulling in the metal ring on the fitting, pull the macroline out.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use 1/8" allen wrench to remove screw behind regulator.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use 1/8" allen wrench to loosen the screw inside the grip on the right side.
-
Slide the upper frame forward on the rails and remove the screw from the slot to separate the two halves of the body.
-