Introduction

How to replace the LCD screen if it is broken or cracked.

Pièces

Aucune pièce nécessaire.

Locate the battery cover on the bottom of the camera.
  • Locate the battery cover on the bottom of the camera.

Ajouter un commentaire

Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
  • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

Ajouter un commentaire

  • Remove the batteries from the camera.

Ajouter un commentaire

  • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

Ajouter un commentaire

  • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

  • Repeat this step for the back casing.

Ajouter un commentaire

  • Locate the black plastic strip under the screen above the white plastic strip.

Ajouter un commentaire

  • Pull up both sides of the black piece up about a mm.

  • The black plastic piece is not meant to come all the way off, just enough to release the screen.

  • Once the piece is lifted carefully slide the screen out of the slot.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dani

Membre depuis le 24/06/2010

21 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 3-3, Johann Summer 2010 Membre de l'équipe Cal Poly, Team 3-3, Johann Summer 2010

CPSU-JOHANN-R10S3G3

2 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 3

Total : 1,518