Aller au contenu principal

Disassembling Polaroid a520 Lens

Ce dont vous avez besoin

  1. Disassembling Polaroid a520 Lens, Battery: étape 1, image 1 de 2 Disassembling Polaroid a520 Lens, Battery: étape 1, image 2 de 2
    • Place your thumb on the battery cover and push left towards the arrow.

    • The cover will release and pop open.

  2. Disassembling Polaroid a520 Lens: étape 2, image 1 de 1
    • Remove the batteries from the camera.

  3. Disassembling Polaroid a520 Lens, Casing: étape 3, image 1 de 1
    • Remove four 3 mm screws on the right side of the camera using a Phillips #1 screwdriver.

    • This will release the front and back casings.

  4. Disassembling Polaroid a520 Lens: étape 4, image 1 de 1
    • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

    • Repeat this step for the back casing.

  5. Disassembling Polaroid a520 Lens, LCD Screen: étape 5, image 1 de 1
    • Under the screen, locate the black plastic strip that sits above the white plastic strip.

  6. Disassembling Polaroid a520 Lens: étape 6, image 1 de 1
    • Pull both sides of the black piece upward-about a mm.

    • The black plastic piece is not meant to come all the way off, just enough to release the screen.

    • Once the piece is lifted carefully slide the screen out of the slot.

  7. Disassembling Polaroid a520 Lens, Logic Board: étape 7, image 1 de 1
    • Unscrew and remove the four (6 mm) screws on the inside casing.

  8. Disassembling Polaroid a520 Lens: étape 8, image 1 de 1
    • Pull the inner casing off of the camera.

  9. Disassembling Polaroid a520 Lens: étape 9, image 1 de 1
    • Unscrew and remove the four (4mm) screws from the logic board.

  10. Disassembling Polaroid a520 Lens: étape 10, image 1 de 1
    • Use a spudger to pry up all four sides of the logic board and slide it out of the camera.

  11. Disassembling Polaroid a520 Lens, Lens: étape 11, image 1 de 1
    • Unscrew and remove the two (5mm) screws from the logic board to the far left.

  12. Disassembling Polaroid a520 Lens: étape 12, image 1 de 1
    • Locate the black plastic piece behind the lens.

  13. Disassembling Polaroid a520 Lens: étape 13, image 1 de 1
    • Similar to the LCD screen, pull the black piece up about a mm and it will release the lens.

    • The piece will not come all the way off; only enough to release the lens.

    • Once the black piece is lifted slide the ribbon out to release the lens.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dani

Membre depuis le 06/24/10

21 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 3-3, Johann Summer 2010 Membre de l'équipe Cal Poly, Team 3-3, Johann Summer 2010

CPSU-JOHANN-R10S3G3

2 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 1,037