Introduction

This guide is to remove the base plate. This will allow you to access the rest of your saw and disassemble it properly.

Pièces

Aucune pièce nécessaire.

Orient your saw so that the blade is pointing in the opposite direction of your body. Ensure that the screws circled are visible and pointing skyward. This will be the standard position of the Jigsaw for the duration of this guide.
  • Orient your saw so that the blade is pointing in the opposite direction of your body. Ensure that the screws circled are visible and pointing skyward. This will be the standard position of the Jigsaw for the duration of this guide.

Ajouter un commentaire

  • Using two hands grip both side of the saw and lift 90 degree as demonstrated.

Ajouter un commentaire

  • Identify the screw circled in red and remove with Phillips screwdriver.

Ajouter un commentaire

  • Lift base plate up into the air and place off to side. Do not forget to place the removed screw in an area you will easily find it later.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adam Cardoso

Membre depuis le 12/11/2013

330 Réputation

3 tutoriels rédigés

Équipe

University of Maryland, Team 4-8, Vijaybhaskar Fall 2013 Membre de l'équipe University of Maryland, Team 4-8, Vijaybhaskar Fall 2013

UMD-VIJAYBHASKAR-F13S4G8

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 21

Total : 1,341