Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

How to get to and remove the logic board

Pièces

Aucune pièce spécifiée.

  1. Push open the latch and remove the battery. Push open the latch and remove the battery.
    • Push open the latch and remove the battery.

  2. Twist off the antenna. Pop off the transparent cylinder.
    • Twist off the antenna.

    • Pop off the transparent cylinder.

  3. Remove the five screws as shown.
    • Remove the five screws as shown.

  4. Carefully pry the back plate off.
    • Carefully pry the back plate off.

  5. Carefully detach golden screen connector. Carefully detach golden screen connector.
    • Carefully detach golden screen connector.

  6. Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
    • Pop out the logic board with spudger.

    • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

  7. Place the logic board on a clean tray. Place the logic board on a clean tray.
    • Place the logic board on a clean tray.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

David

Membre depuis le 19/04/2010

25 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 10-43, Garner Spring 2010 Membre de l'équipe Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 membres

12 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,403