Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
The front housing includes the motor, the chuck, and the gears. There's a good chance that whatever needs to be replaced will be found in here.
Ce dont vous avez besoin
-
-
On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Équipe
Cal Poly, Team 5-17, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 5-17, Maness Fall 2010
CPSU-MANESS-F10S5G17
3 membres
7 tutoriels rédigés
