Introduction

Removing the front cover is a necessary first step in disassembling the camera in order to repair or replace any internal parts.

Pièces

Aucune pièce nécessaire.

  1. Locate the battery door at the bottom of the camera.
    • Locate the battery door at the bottom of the camera.

    • Press down on the door and slide it back. The door will pop open.

    Ajouter un commentaire

  2. Remove the battery from the door that you opened in the previous step.
    • Remove the battery from the door that you opened in the previous step.

    Ajouter un commentaire

    • There are two screws on the left and right sides of the camera, and two screws on the bottom.

    • Use a PH00 screwdriver and remove the six 2.9mm screws.

    Ajouter un commentaire

    • Use hands to gently pry the front casing away from the camera.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

iDeleted

Membre depuis le 07/07/2010

2 101 Réputation

39 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 2,255