Introduction
Removing the front cover is a necessary first step in disassembling the camera in order to repair or replace any internal parts.
Ce dont vous avez besoin
-
-
Locate the battery door at the bottom of the camera.
-
Press down on the door and slide it back. The door will pop open.
-
-
-
-
Use a PH00 screwdriver and remove the six 2.9mm screws.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.