Aller au contenu principal

Disassembling Sony Vaio VGN-FW 590 Audio USB Board

Ce dont vous avez besoin

  1. Disassembling Sony Vaio VGN-FW 590 Audio USB Board, Audio USB Board: étape 1, image 1 de 1
    • - Remove battery.

    • - Remove memory tray door (1 Screw).

    • - Remove hard drive door (1 Screw).

    • - Remove hard drive (3 Screws).

  2. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: étape 2, image 1 de 1
    • - Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.

  3. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: étape 3, image 1 de 1
    • - Remove CD/DVD Drive by sliding it out.

    • - Remove three more screws, which were hiding under the DVD drive.

  4. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: étape 4, image 1 de 1
    • - Carefully remove the cover, by unpopping it with a slim flathead, slide it out away from the RJ-45, HDMI and VGA ports.

  5. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: étape 5, image 1 de 1
    • - The audio/usb interface card is now within reach. Just remove the two screws and carefully slide out the flat connector to remove the card.

  6. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: étape 6, image 1 de 1
    • - Fire up the air compressor and blow out dust from the fan and heatsinks.

  7. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: étape 7, image 1 de 1
    • - If you are replacing your RAM, simply unpop the four latches and slide out the memory sticks.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

Artem Nikulkov

Membre depuis le 10/22/10

313 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 9

Total : 21,090