Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Using the Phillips #0 in the bit driver, carefully loosen and remove the single  5mm screw. With the retaining screw removed, lift the panel upwards to separate it from the netbook.
    • Using the Phillips #0 in the bit driver, carefully loosen and remove the single 5mm screw.

    • With the retaining screw removed, lift the panel upwards to separate it from the netbook.

  2. To replace the panel, do step 1 in reverse: Align the panel slots in the appropriate grooves and set in place.
    • To replace the panel, do step 1 in reverse:

    • Align the panel slots in the appropriate grooves and set in place.

    • With the bit driver, replace the screw to secure the RAM panel.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Using the bit driver and the Phillips bit, remove both of the panel's retaining screws. With the screws removed, lift the panel in the designated direction, as depicted in photo, for removal.
    • Using the bit driver and the Phillips bit, remove both of the panel's retaining screws.

    • With the screws removed, lift the panel in the designated direction, as depicted in photo, for removal.

    • The hard drive is located beneath this cover and is now accessible.

  5. To replace the hard drive panel, do step 3 in reverse: Place the panel back in its original position and press down.
    • To replace the hard drive panel, do step 3 in reverse:

    • Place the panel back in its original position and press down.

    • If the hard drive was removed or replaced during this process, improper installation may prevent the hard drive panel from sitting in the slots properly.

    • With the bit driver and Phillips bit, replace the two retaining screws to secure the cover plate in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

Membre depuis le 18/10/2013

964 Réputation

9 tutoriels rédigés

Équipe

Clemson, Team 14-2, Benson Fall 2013 Membre de l'équipe Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 625