Introduction

Disassembly of Translucent Flashlight for Analysis or Replacement Parts

  1. Remove light mechanism from body containing battery. Twist light bulb (red circle) counterclockwise while holding base of flashlight (black circle).
    • Remove light mechanism from body containing battery. Twist light bulb (red circle) counterclockwise while holding base of flashlight (black circle).

    Ajouter un commentaire

  2. Angle body of flashlight until two AA batteries fall out. Store battery components.
    • Angle body of flashlight until two AA batteries fall out. Store battery components.

    Ajouter un commentaire

    • Pull off rubber chassis of flashlight. Peel back rubber on battery side of flashlight first (red circle). Grip remaining rubber (black circle) and pull off plastic/metal body in direction counter to opening.

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Remove metal apparatus containing button switch first by bending piece in arc shape. Carefully pull out clipped tip as shown.

    Ajouter un commentaire

    • Using the freed tip, detach the bottom of the metal switch connected to the spring of the grounded/negative end where the AA batteries are located (circle).

    • Push metal end into square hole so clip detaches from battery spring (circle). Pull out rest of clip avoiding spring, so metal switch freed from body.

    Ajouter un commentaire

    • Spring connected to flashlight base removed using tip of metal switch (circle) hooking and pulling into opening.

    • Initiate battery switch disassembly (circle).

    Ajouter un commentaire

    • The switch mechanism disassembly removes the button attached to the lid (red circle) from the grooves (blue circle) containing the switch components.

    • Next, remove the spring first and then metallic, grooved pressure plate which contained the spring (red circle) using hand.

    • Finally, remove metal connections of battery switch by lifting holes (red circle) off containment piece.

    Ajouter un commentaire

    • The battery components of translucent flashlight completely disassembled.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Phillip Phung

Membre depuis le 19/01/2012

486 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 8-18, Maness Winter 2012 Membre de l'équipe Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 membres

10 tutoriels rédigés

thanks a lot that really help. especially the on off switch 2 spring part. mine was a rear switch though

John Doe - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 12

Total : 944