Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Pièces

Aucune pièce spécifiée.

  1. Use a large plastic opening tool along the rear panel: There are 4 clips to release. There are 4 clips to release.
    • Use a large plastic opening tool along the rear panel:

    • There are 4 clips to release.

  2. Slide the cover along the plastic frame. Slide the cover along the plastic frame.
    • Slide the cover along the plastic frame.

  3. Slide off the largest plastic pieces.
    • Slide off the largest plastic pieces.

  4. Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  5. Bend the second small plastic piece to release it from the rubber piece. Now you can slide it out. Now you can slide it out.
    • Bend the second small plastic piece to release it from the rubber piece.

    • Now you can slide it out.

  6. Slide out the hard drive as shown in the picture Make sure to slide as shown or you may damage the USB bridge logic board.
    • Slide out the hard drive as shown in the picture

    • Make sure to slide as shown or you may damage the USB bridge logic board.

  7. Remove the 4 rubber piece from the plastic frame at each corner. Remove the 4 rubber piece from the plastic frame at each corner.
    • Remove the 4 rubber piece from the plastic frame at each corner.

  8. Remove the rubber piece from the  SATA/USB bridge logic board.
    • Remove the rubber piece from the SATA/USB bridge logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gaetan

Membre depuis le 26/12/2012

9 460 Réputation

18 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 11

Total : 1,125