Réparez vos affaires Communauté Boutique

Disassembling Western Digital Essentials HD Anti-vibration rubber pieces

Ce dont vous avez besoin

  1. Disassembling Western Digital Essentials HD Anti-vibration rubber pieces, Case: étape 1, image 1 de 3 Disassembling Western Digital Essentials HD Anti-vibration rubber pieces, Case: étape 1, image 2 de 3 Disassembling Western Digital Essentials HD Anti-vibration rubber pieces, Case: étape 1, image 3 de 3

    • Use a large plastic opening tool along the rear panel:

    • There are 4 clips to release.

    Traduire

  2. Disassembling Western Digital Essentials HD Anti-vibration rubber pieces: étape 2, image 1 de 2 Disassembling Western Digital Essentials HD Anti-vibration rubber pieces: étape 2, image 2 de 2

    • Slide the cover along the plastic frame.

    Traduire

  3. Disassembling Western Digital Essentials HD Anti-vibration rubber pieces, LED Light conducting plastic pieces: étape 3, image 1 de 1

    • Slide off the largest plastic pieces.

    Traduire

  5. Disassembling Western Digital Essentials HD Anti-vibration rubber pieces: étape 4, image 1 de 3 Disassembling Western Digital Essentials HD Anti-vibration rubber pieces: étape 4, image 2 de 3 Disassembling Western Digital Essentials HD Anti-vibration rubber pieces: étape 4, image 3 de 3

    • Bend the second small plastic piece to release it from the rubber piece.

    • Now you can slide it out.

    Traduire

  6. Disassembling Western Digital Essentials HD Anti-vibration rubber pieces, Disassembling Western Digital Essentials HD Hard Drive: étape 5, image 1 de 2 Disassembling Western Digital Essentials HD Anti-vibration rubber pieces, Disassembling Western Digital Essentials HD Hard Drive: étape 5, image 2 de 2

    • Slide out the hard drive as shown in the picture

    • Make sure to slide as shown or you may damage the USB bridge logic board.

    Traduire

  7. Disassembling Western Digital Essentials HD Anti-vibration rubber pieces, Disassembling Western Digital Essentials HD Anti-vibration rubber pieces: étape 6, image 1 de 2 Disassembling Western Digital Essentials HD Anti-vibration rubber pieces, Disassembling Western Digital Essentials HD Anti-vibration rubber pieces: étape 6, image 2 de 2

    • Remove the 4 rubber piece from the plastic frame at each corner.

    Traduire

  8. Disassembling Western Digital Essentials HD Anti-vibration rubber pieces: étape 7, image 1 de 1

    • Remove the rubber piece from the SATA/USB bridge logic board.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Gaetan

Membre depuis le 12/26/12

9 574 Réputation

18 tutoriels rédigés

Badges: 33

+ 30 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 1,555