Outils

Aucun outil requis.

Pièces

Aucune pièce nécessaire.

  1. Use a large plastic opening tool along the rear panel: There are 4 clips to release. There are 4 clips to release.
    • Use a large plastic opening tool along the rear panel:

      • There are 4 clips to release.

  2. Slide the cover along the plastic frame. Slide the cover along the plastic frame.
    • Slide the cover along the plastic frame.

  3. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Slide off the largest plastic pieces.
    • Slide off the largest plastic pieces.

  5. Bend the second small plastic piece to release it from the rubber piece. Now you can slide it out. Now you can slide it out.
    • Bend the second small plastic piece to release it from the rubber piece.

    • Now you can slide it out.

  6. Slide out the hard drive as shown in the picture Make sure to slide as shown or you may damage the USB bridge logic board.
    • Slide out the hard drive as shown in the picture

    • Make sure to slide as shown or you may damage the USB bridge logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Gaetan

Membre depuis le 26/12/2012

9 337 Réputation

18 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 25

Total : 2,299