Introduction

Removing the face plate is necessary for most repairs to this device. Removing the face plate is a relatively simple process, requiring only the removal of several screws.

Pièces

Aucune pièce nécessaire.

Turn the keyboard over so that the keys are facing the ground.
  • Turn the keyboard over so that the keys are facing the ground.

Ajouter un commentaire

Pop the tabs on the battery casing and remove it from the back plate.
  • Pop the tabs on the battery casing and remove it from the back plate.

Ajouter un commentaire

  • Locate the six batteries and remove them from the battery cavity.

what type of batteries? and how much ?

thanks godbless

colladonelson - Réponse

  • Remove the six 10mm screws at the top of the backplate.

Ajouter un commentaire

  • Remove the seven 12mm screws in the middle of the back plate.

Ajouter un commentaire

  • Remove the eight 10mm screws from the side and the bottom of the back plate.

Ajouter un commentaire

  • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

  • Flip over the keyboard

Ajouter un commentaire

  • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

    • Be careful when removing the face plate. There are wires attached.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lonnie Bissmeyer

Membre depuis le 16/09/2012

300 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 2-62, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 2-62, Propen Fall 2012

CPSU-PROPEN-F12S2G62

2 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 1,107