Réparez vos affaires Communauté Boutique

Disassembling Yamaha YPG-225 Faceplate

Introduction

Removing the face plate is necessary for most repairs to this device. Removing the face plate is a relatively simple process, requiring only the removal of several screws.

Ce dont vous avez besoin

  1. Disassembling Yamaha YPG-225 Faceplate, Batteries: étape 1, image 1 de 1

    • Turn the keyboard over so that the keys are facing the ground.

    Modifier

  2. Disassembling Yamaha YPG-225 Faceplate: étape 2, image 1 de 1

    • Pop the tabs on the battery casing and remove it from the back plate.

    Modifier

  3. Disassembling Yamaha YPG-225 Faceplate: étape 3, image 1 de 1

    • Locate the six batteries and remove them from the battery cavity.

    Modifier

  5. Disassembling Yamaha YPG-225 Faceplate, Faceplate: étape 4, image 1 de 1

    • Remove the six 10mm screws at the top of the backplate.

    Modifier

  6. Disassembling Yamaha YPG-225 Faceplate: étape 5, image 1 de 1

    • Remove the seven 12mm screws in the middle of the back plate.

    Modifier

  7. Disassembling Yamaha YPG-225 Faceplate: étape 6, image 1 de 1

    • Remove the eight 10mm screws from the side and the bottom of the back plate.

    Modifier

  8. Disassembling Yamaha YPG-225 Faceplate: étape 7, image 1 de 1

    • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

    • Flip over the keyboard.

    Modifier

  9. Disassembling Yamaha YPG-225 Faceplate: étape 8, image 1 de 2 Disassembling Yamaha YPG-225 Faceplate: étape 8, image 2 de 2

    • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

    • Be careful when removing the face plate. There are wires attached.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Lonnie Bissmeyer

Membre depuis le 09/16/12

444 Réputation

4 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

Cal Poly, Team 2-62, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 2-62, Propen Fall 2012

CPSU-PROPEN-F12S2G62

2 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,651