Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a 5-point pentalobe screwdriver, unscrew the 2 pentalobe on the bottom of the phone near the dock connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push the back glass towards the top of the phone.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a #000 Phillips screwdriver, unscrew the 2 very small Phillips screws.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a plastic opener tool, pry up the battery connector shield. Be careful not to lose the smaller antenna connector shield under the top connector sheild.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull upwards on the plastic tab. If it's the first time, you may have to use the plastic pry tool on the outside (right) edge of the battery to loosen battery first.
-
Then, out pops the battery.
-
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.