Réparez vos affaires Communauté Boutique

Disassembling iPhone 4S Speaker Enclosure

Tutoriel Archivé
Ce tutoriel est conservé uniquement à des fins de suivis historiques. Utilisez la version actuelle du tutoriel pour effectuer votre réparation.

Introduction

This guide has been updated by iFixit staff! Read the new, official guide here.

Ce dont vous avez besoin

  1. Disassembling iPhone 4S Speaker Enclosure, Disassembling iPhone 4S Battery: étape 1, image 1 de 1

    • Using a 5-point pentalobe screwdriver, unscrew the 2 pentalobe on the bottom of the phone near the dock connector.

    Modifier

  2. Disassembling iPhone 4S Speaker Enclosure: étape 2, image 1 de 1

    • Push the back glass towards the top of the phone.

    Modifier

  3. Disassembling iPhone 4S Speaker Enclosure: étape 3, image 1 de 1

    • Using a #000 Phillips screwdriver, unscrew the 2 very small Phillips screws.

    Modifier

  4. Disassembling iPhone 4S Speaker Enclosure: étape 4, image 1 de 2 Disassembling iPhone 4S Speaker Enclosure: étape 4, image 2 de 2

    • Using a plastic opener tool, pry up the battery connector shield. Be careful not to lose the smaller antenna connector shield under the top connector sheild.

    • Using a plastic opener tool, pry up the battery connector.

    Modifier

  5. Disassembling iPhone 4S Speaker Enclosure: étape 5, image 1 de 1

    • Pull upwards on the plastic tab. If it's the first time, you may have to use the plastic pry tool on the outside (right) edge of the battery to loosen battery first.

    • Then, out pops the battery.

    Modifier

  7. Disassembling iPhone 4S Speaker Enclosure, Disassembling iPhone 4S Logic Board: étape 6, image 1 de 1

    • Disconnect the antenna cable from the logic board.

    Modifier

  8. Disassembling iPhone 4S Speaker Enclosure: étape 7, image 1 de 1

    • Unscrew the 2 phillips screws holding the shield covering the dock connector ribbon.

    • One of the screws is .2 millimeters longer than the other.

    Modifier

  9. Disassembling iPhone 4S Speaker Enclosure: étape 8, image 1 de 2 Disassembling iPhone 4S Speaker Enclosure: étape 8, image 2 de 2

    • Disconnect the dock connector ribbon from the logic board.

    • Pull the cable up and flow it to the side.

    Modifier

  10. Disassembling iPhone 4S Speaker Enclosure: étape 9, image 1 de 2 Disassembling iPhone 4S Speaker Enclosure: étape 9, image 2 de 2

    • Unscrew the 4 screws holding the large shield and the single screw holding the small shield.

    Modifier

  11. Disassembling iPhone 4S Speaker Enclosure: étape 10, image 1 de 1

    • Using the plastic opening tool, pry up the 7 connectors on the top of the logic board.

    • The back camera will come out, make sure you get the small piece of black plastic covering the back of the camera.

    Modifier

  12. Disassembling iPhone 4S Speaker Enclosure: étape 11, image 1 de 2 Disassembling iPhone 4S Speaker Enclosure: étape 11, image 2 de 2

    • Unscrew the 2 flat head screws.

    • Unscrew the 3 phillips head screws, the top one is covered by a small piece of black tape.

    Modifier

  13. Disassembling iPhone 4S Speaker Enclosure: étape 12, image 1 de 1

    • Using your fingers or a plastic opening tool carefully pull out the logic board.

    Modifier

  14. Disassembling iPhone 4S Speaker Enclosure, Disassembling iPhone 4S Vibrator: étape 13, image 1 de 2 Disassembling iPhone 4S Speaker Enclosure, Disassembling iPhone 4S Vibrator: étape 13, image 2 de 2

    • Pry the vibrator up off the metal.

    Modifier

  15. Disassembling iPhone 4S Speaker Enclosure, Disassembling iPhone 4S Speaker Enclosure: étape 14, image 1 de 2 Disassembling iPhone 4S Speaker Enclosure, Disassembling iPhone 4S Speaker Enclosure: étape 14, image 2 de 2

    • Unscrew the 2 phillips screws holding the speaker enclosure.

    • There's a small black piece of plastic under the left screw.

    Modifier

  16. Disassembling iPhone 4S Speaker Enclosure: étape 15, image 1 de 2 Disassembling iPhone 4S Speaker Enclosure: étape 15, image 2 de 2

    • Using the plastic opening tools or your fingers pull up on the speaker enclosure.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

Chandler Skinner

Membre depuis le 10/15/11

3 710 Réputation

6 tutoriels rédigés

Badges: 33

+ 30 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 3,524