Pièces

Aucune pièce nécessaire.

  1. Begin by removing the rubber grip along the handle.
    • Begin by removing the rubber grip along the handle.

    Ajouter un commentaire

  2. Remove the screws from the top to take the metal piece and plastic part off.
    • Remove the screws from the top to take the metal piece and plastic part off.

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Pry open the plastic cover into two separate pieces. The plastic is very durable so don't worry about breaking it upon prying it open.

    it doesn’t show any detail like the spring location

    kglenhunter - Réponse

    • Here is the final result. This gives access to the switch button, chip set, battery and motor.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

12 autre(s) ont terminé cette réparation.

nathan

Membre depuis le 22/10/2013

1 150 Réputation

6 tutoriels rédigés

Équipe

University of Maryland, Team 1-3, Shastany Fall 2013 Membre de l'équipe University of Maryland, Team 1-3, Shastany Fall 2013

UMD-SHASTANY-F13S1G3

3 membres

6 tutoriels rédigés

Well this does not show how to properly remove the metal piece that surrounds the power button , which needs to be removed to access 2 screws ( that I can see it) that need to be removed to completely separate the plastic encasement of the intrrnals has

Andrew Beeson - Réponse

very helpful for the first two steps. I need like six more between the 2nd step and the last step. but otherwise, very helpful.  Thank you so much

tundraorchid - Réponse

Thanks…worked well.

Magpie - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 7

7 derniers jours : 61

30 derniers jours : 291

Total : 23,038