Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Take off the back cover by pushing it down and sliding it backwards.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Take out the battery, SIM card, and MicroSD card.
-
Unscrew the two T6 Torx screws.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Try to seperate the front cover from the rest of the phone. The front cover is held by four plastic clips.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
You can take off the keypad now, this is sitting loose on top of the sensors.
-
Unscrew the four remaining T6 Torx screws.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The motherboard with it's screen are now loose, you can pop it right out.
-
If you've been using this phone for a while, there's probably some dust inside the back shell.
-
There's a lot of contacts exposed, so make sure not to damage those.
-
Annulation : je n'ai pas terminé ce tutoriel.
20 autres ont terminé cette réparation.