Disassembling

Introduction

If you are having issues with your Bose SoundDock XT and want to save money and repair the device yourself, you have come to the right place. These instructions will help you disassemble the SoundDock XT.

Ce dont vous avez besoin

Étape 1 Disassembling

Disassembling, Disassembling: étape 1, image 1 de 1

Remove six 10 mm length screws from the bottom panel of the SoundDock.XT using a #1 Phillips screwdriver.

Modifier

Étape 2

Remove the Front Panel, use a #2 Phillips screwdriver to remove the two 6.5 mm length front panel screws located under the bottom cover (highlighted in red circles in the photo).

Modifier

Étape 3

Next, use a plastic opening tool to slide under the edge of the front cover. Start edge located at the top of the left or right speaker and work your way around the speaker. Remove the front cover.

Modifier

Étape 4

Outil utilisé dans cette étape :

Tweezers

$4.99

J'achète

Use a wide nose tweezer to remove six rubber grommets from the front of the SoundDock XT.
Using pointed tweezers may damage the rubber grommet.

Modifier

Étape 5

Use a #2 screwdriver to remove the six 8.5 mm length screws from the speaker cover.

Modifier

Étape 6

Using a metal spudger, slide between the outer case and the front speaker cover. Work your way around the cover and remove the speaker cover. You now have access to the speakers.
Using the metal spudger may damage the plastic speaker cover.

Modifier