Réparez vos affaires Communauté Boutique

Dismantle Nespresso CitiZ

Introduction

For many repairs the CitiZ must be opened, this is shown here.

Ce dont vous avez besoin

  1. Dismantle Nespresso CitiZ, Dismantle Nespresso CitiZ: étape 1, image 1 de 1

    • Never forget: pull the plug!

    • Remove all attachments: Water tank, capsule and cup drawer, drip tray.

    • The model shown is also equipped with a milk frother, remove that too.

    Traduire

  2. Dismantle Nespresso CitiZ: étape 2, image 1 de 2 Dismantle Nespresso CitiZ: étape 2, image 2 de 2
    Outil utilisé dans cette étape :
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    J'achète

    • The bottom is secured by oval head screws.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Nespresso wants to keep us out of our own machines!!!

    • Remove five oval head screws securing the large bottom panel.

    • Note: this panel is smaller on models without milk frother.

    Traduire

  3. Dismantle Nespresso CitiZ: étape 3, image 1 de 3 Dismantle Nespresso CitiZ: étape 3, image 2 de 3 Dismantle Nespresso CitiZ: étape 3, image 3 de 3

    • The bottom panel is just snapped into place. Insert a metal spudger into the slots and lift the panel out. It sits quite tightly and you might use some force to get it out.

    Traduire

  5. Dismantle Nespresso CitiZ: étape 4, image 1 de 1

    • Remove the large bottom panel.

    Traduire

  6. Dismantle Nespresso CitiZ: étape 5, image 1 de 1

    • Use a spudger to slide off the two silicon tubes.

    Traduire

  7. Dismantle Nespresso CitiZ: étape 6, image 1 de 2 Dismantle Nespresso CitiZ: étape 6, image 2 de 2

    • Disconnect the two spade plugs on the blue and brown wires from the power switch. The two left ones remain.

    Traduire

  8. Dismantle Nespresso CitiZ: étape 7, image 1 de 1

    • Remove four oval head screws from the small bottom panel.

    • Remove the main device from the base. It´s still connected with some wires, but this doesn´t bother much.

    Traduire

  9. Dismantle Nespresso CitiZ: étape 8, image 1 de 3 Dismantle Nespresso CitiZ: étape 8, image 2 de 3 Dismantle Nespresso CitiZ: étape 8, image 3 de 3

    • The two colored side panels are only snapped into place. However, the latches sit very tight. You really need a lot of force. First lift the lower edge using a plastic opening tool.

    • Depending from the model it might help, when you first pry off the coffee spout. (See next step)

    • Unfold each of the side panels upwards and remove them.

    Traduire

  10. Dismantle Nespresso CitiZ: étape 9, image 1 de 1

    • Insert a opening tool in the gap on the bottom of the coffee spout. Pry it off carefully.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Merci à ces traducteurs :

de en

100%

VauWeh

VauWeh nous aide à réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Auteur

avec 1 autre contributeur

VauWeh

Membre depuis le 10/19/15

202 869 Réputation

246 tutoriels rédigés

Badges: 44

+ 41 badges supplémentaires

Équipe

Repair is War on Entropy Membre de l'équipe Repair is War on Entropy

Community

25 membres

1 110 tutoriels rédigés

2 commentaires

Wie geht es weiter um an die Heizung zu kommen? Vermutlich ist eine Reperatur nicht möglich.

Martin Gastberger - Réponse

Ich denke der Teardown zeigt es: Nespresso CitiZ Teardown

VauWeh -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 22

7 derniers jours : 156

30 derniers jours : 606

Total : 9,535