Réparez vos affaires Communauté Boutique

Droid Ultra XT1080 Charging Port Replacement

Introduction

This guide will teach you how to replace the charging port of your device.

Ce dont vous avez besoin

  1. Droid Ultra XT1080 Charging Port Replacement, Charging Port: étape 1, image 1 de 1

    • Remove SIM card tray from the device with a plastic opening tool.

    Modifier

  2. Droid Ultra XT1080 Charging Port Replacement: étape 2, image 1 de 1

    • Once SIM card tray is removed press the spudger between the plastic case and the frame of the device until you hear a snap.

    • Work your away around the device until all the plastic clips are undone.

    • Be gentle with the plastic to make sure it doesn't break.

    Modifier

  3. Droid Ultra XT1080 Charging Port Replacement: étape 3, image 1 de 1

    • Remove the five screws on top of the device with a T5 Torx.

    • Remove the single screw holding the camera with a T4 Torx.

    • Remove the two screws on the bottom of the device with a T5 Torx.

    Modifier

  5. Droid Ultra XT1080 Charging Port Replacement: étape 4, image 1 de 2 Droid Ultra XT1080 Charging Port Replacement: étape 4, image 2 de 2

    • Once the screws are removed, use a plastic spudger and lift up the two plastic pieces that were secured by the screws.

    Modifier

  6. Droid Ultra XT1080 Charging Port Replacement: étape 5, image 1 de 1

    • Remove the four T5 Torx screws securing the motherboard.

    Modifier

  7. Droid Ultra XT1080 Charging Port Replacement: étape 6, image 1 de 1

    • Gently pry the motherboard out of the frame of the device.

    Modifier

  8. Droid Ultra XT1080 Charging Port Replacement: étape 7, image 1 de 2 Droid Ultra XT1080 Charging Port Replacement: étape 7, image 2 de 2

    • Once the motherboard is free flip it over on its back so all the components are showing.

    Modifier

  9. Droid Ultra XT1080 Charging Port Replacement: étape 8, image 1 de 1

    • To fully replace the charging port you need to desolder the port and solder a new one in.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 1 autre contributeur

knoyes

Membre depuis le 10/30/18

785 Réputation

5 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

UMass Dartmouth, Team S3-G8, Peak Fall 2018 Membre de l'équipe UMass Dartmouth, Team S3-G8, Peak Fall 2018

UMASSD-PEAK-F18S3G8

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 850