Introduction
Follow this guide to replace the L1 and R1 trigger buttons on a Sony PlayStation DualSense V5 controller.
Disconnect and power down your controller before starting your repair.
Ce dont vous avez besoin
-
-
-
With one hand, grip the controller and use your thumb to hold down the left trigger.
-
With your free hand, insert the flat end of a spudger between the L1 and L2 buttons.
-
Use the spudger to gently pry the L1 button away from the controller and remove it, holding your finger over the button so it doesn't eject.
Demander à FixBot
-
-
-
-
Repeat the previous step to remove the R1 button.
-
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
