Introduction

This guide will show the reader how to remove and replace the rumble motors for a Dualshock 4 controller.

Remove the four  2mm screws on the rear plate using the #000 Phillips screwdriver.
  • Remove the four 2mm screws on the rear plate using the #000 Phillips screwdriver.

Ajouter un commentaire

Remove the rear plate.
  • Remove the rear plate.

  • We recommend using a metal spudger for this step.

Ajouter un commentaire

  • Desolder the joints that attach the rumble motors to the motherboard.

  • For more information on soldering, click here.

Ajouter un commentaire

  • There is a hidden screw underneath the battery pack that attaches the faceplate to the motherboard.

  • Lift the pack and remove the 10mm screw using the #000 Phillips screwdriver.

Ajouter un commentaire

  • Remove the faceplate from the motherboard.

Ajouter un commentaire

  • With some added pressure, push down and outward in order to free and remove the rumble motors from their socket.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Pedro Rodriguez

Membre depuis le 22/02/2018

172 Réputation

1 tutoriel rédigé

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 7

7 derniers jours : 31

30 derniers jours : 118

Total : 274