Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

This guide will show how to remove the wand hose in case of a clog, broken seal or other malfunction.

  1. Turn off power and unplug the vacuum, then turn the vacuum to look at the hose. Turn off power and unplug the vacuum, then turn the vacuum to look at the hose.
    • Turn off power and unplug the vacuum, then turn the vacuum to look at the hose.

  2. Turn the red dial counterclockwise and pull up on the wand to remove. Turn the red dial counterclockwise and pull up on the wand to remove.
    • Turn the red dial counterclockwise and pull up on the wand to remove.

  3. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  4. Press in the red button where the wand attaches to the hose and pull apart. Press in the red button where the wand attaches to the hose and pull apart. Press in the red button where the wand attaches to the hose and pull apart.
    • Press in the red button where the wand attaches to the hose and pull apart.

  5. Remove the main canister by pressing the red release button and pulling up and away.
    • Remove the main canister by pressing the red release button and pulling up and away.

  6. Grip the base of the hose so your thumb reaches around to press the red tab shown. Push the red tab at towards the hose while pulling the hose upwards. With some wiggling, it will come out.
    • Grip the base of the hose so your thumb reaches around to press the red tab shown.

    • Push the red tab at towards the hose while pulling the hose upwards.

    • With some wiggling, it will come out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

Mitchell Klein

Membre depuis le 23/04/2017

419 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S15-G5, Banghart Spring 2017 Membre de l'équipe Cal Poly, Team S15-G5, Banghart Spring 2017

CPSU-BANGHART-S17S15G5

4 membres

7 tutoriels rédigés

I used the hose and attachments on my ball animal + up13 and after removal of attachment and stowing the hose to the handle assy. , I can not get the vacumm to stop sucking from the top of the handle? I’ve attempted reading the owners manual (which is not user friendly) and also watched Youtube demonstrations with no luck. This has been two days of struggling with no success???

james gaspard - Réponse

The suction is diverted to the hose when the machine is upright. Stand behind the machine, pull the handle towards you and the transfer valve automatically diverts the suction to the brush head. Put it back into the upright position and suction automatically diverts to the rear hose.

mike.vardy - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 48

7 derniers jours : 389

30 derniers jours : 1,768

Total : 42,506