Réparez vos affaires Communauté Boutique

Dyson Ball Animal Hose Replacement

Introduction

This guide will show how to remove the wand hose in case of a clog, broken seal or other malfunction.

Ce dont vous avez besoin

  1. Dyson Ball Animal Hose Replacement, Hose: étape 1, image 1 de 2 Dyson Ball Animal Hose Replacement, Hose: étape 1, image 2 de 2

    • Turn off power and unplug the vacuum, then turn the vacuum to look at the hose.

    Modifier

  2. Dyson Ball Animal Hose Replacement: étape 2, image 1 de 2 Dyson Ball Animal Hose Replacement: étape 2, image 2 de 2

    • Turn the red dial counterclockwise and pull up on the wand to remove.

    Modifier

  4. Dyson Ball Animal Hose Replacement: étape 3, image 1 de 3 Dyson Ball Animal Hose Replacement: étape 3, image 2 de 3 Dyson Ball Animal Hose Replacement: étape 3, image 3 de 3

    • Press in the red button where the wand attaches to the hose and pull apart.

    Modifier

  5. Dyson Ball Animal Hose Replacement: étape 4, image 1 de 1

    • Remove the main canister by pressing the red release button and pulling up and away.

    Modifier

  6. Dyson Ball Animal Hose Replacement: étape 5, image 1 de 3 Dyson Ball Animal Hose Replacement: étape 5, image 2 de 3 Dyson Ball Animal Hose Replacement: étape 5, image 3 de 3

    • Grip the base of the hose so your thumb reaches around to press the red tab shown.

    • Push the red tab at towards the hose while pulling the hose upwards.

    • With some wiggling, it will come out.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

13 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Mitchell Klein

Membre depuis le 04/23/17

839 Réputation

2 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

Cal Poly, Team S15-G5, Banghart Spring 2017 Membre de l'équipe Cal Poly, Team S15-G5, Banghart Spring 2017

CPSU-BANGHART-S17S15G5

4 membres

16 tutoriels rédigés

9 commentaires

I used the hose and attachments on my ball animal + up13 and after removal of attachment and stowing the hose to the handle assy. , I can not get the vacumm to stop sucking from the top of the handle? I’ve attempted reading the owners manual (which is not user friendly) and also watched Youtube demonstrations with no luck. This has been two days of struggling with no success???

james gaspard - Réponse

The suction is diverted to the hose when the machine is upright. Stand behind the machine, pull the handle towards you and the transfer valve automatically diverts the suction to the brush head. Put it back into the upright position and suction automatically diverts to the rear hose.

mike.vardy - Réponse

can anyone show me a picture of the transfer valve? I think it is not going into position when I try to use the wand.

Rita & Chuck Mergen - Réponse

it looks like the wand has a round plastic device in middle is this correct? i have taken the wand out of the hose and the hose has suction but when all goes back together and turn on the hand held wand device has no suction

woody jones - Réponse

Awesome! Worked like a charm. I had sucked up one of the cat's toys. I was able to remove the little toy and the hose works again.

Thank you!

jboyd5322 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 24

7 derniers jours : 242

30 derniers jours : 1,143

Total : 129,814