Aller au contenu principal

Introduction

This guide will show you how to replace the nozzle and handle on a Dyson DC28 Animal.

  1. Begin by completely unwinding the wire on the back.
    • Begin by completely unwinding the wire on the back.

  2. Place the vacuum either upright or on its back and lift the nozzle lid to access the nozzle.
    • Place the vacuum either upright or on its back and lift the nozzle lid to access the nozzle.

  3. Pull the nozzle until it is completely out of its housing.
    • Pull the nozzle until it is completely out of its housing.

  4. With the vacuum placed upright, press firmly on the gray button, located on the back of the handle, and pull directly upwards until handle is completely removed from the rest of the vacuum With the vacuum placed upright, press firmly on the gray button, located on the back of the handle, and pull directly upwards until handle is completely removed from the rest of the vacuum
    • With the vacuum placed upright, press firmly on the gray button, located on the back of the handle, and pull directly upwards until handle is completely removed from the rest of the vacuum

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jerico Ducay

Membre depuis le 30/01/2017

131 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 21-4, Maness Winter 2017 Membre de l'équipe Cal Poly, Team 21-4, Maness Winter 2017

CPSU-MANESS-W17S21G4

5 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 777