Aller au contenu principal

Introduction

This guide will show you how to remove the soleplate on the bottom of the vacuum. This is easily done by removing 3 plastic fasteners that lock the soleplate in place. Follow the steps below to see how this is done.

Pièces

Aucune pièce spécifiée.

    • Lay the vacuum on its side to allow for easy access to the bottom of the cleaner head.

    • Unlock the sole plate by using a quarter or other flat tool to turn the three plastic bolts counter-clockwise, as indicated on the sole plate.

    • The plastic fasteners can be damaged when using a metal tool to turn them.

  1. Gently pull off the sole plate Gently pull off the sole plate
    • Gently pull off the sole plate

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Jake Walejko

Membre depuis le 25/01/2017

157 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 21-4, Maness Winter 2017 Membre de l'équipe Cal Poly, Team 21-4, Maness Winter 2017

CPSU-MANESS-W17S21G4

5 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 17

Total : 1,273