Réparez vos affaires Communauté Boutique

Dyson DC39 Origin Cyclone Filter Replacement

Introduction

This guide will outline how to remove the cyclone filter for either cleaning or replacement. The guide requires no advanced skills and is relatively easy.

Ce dont vous avez besoin

  1. Dyson DC39 Origin Cyclone Filter Replacement, Bin: étape 1, image 1 de 3 Dyson DC39 Origin Cyclone Filter Replacement, Bin: étape 1, image 2 de 3 Dyson DC39 Origin Cyclone Filter Replacement, Bin: étape 1, image 3 de 3

    • Push down on the gray button located next to the power button to release the bin from the ball housing.

    • Pull the bin away, then up from the ball housing to remove it.

    • If the bin won't fit back into place during re-assembly, you may need to push the grey button again.

    Modifier

  2. Dyson DC39 Origin Cyclone Filter Replacement, Pre-filter: étape 2, image 1 de 3 Dyson DC39 Origin Cyclone Filter Replacement, Pre-filter: étape 2, image 2 de 3 Dyson DC39 Origin Cyclone Filter Replacement, Pre-filter: étape 2, image 3 de 3

    • Remove the purple pre-filter by pulling it up and out of the bin.

    Modifier

  4. Dyson DC39 Origin Cyclone Filter Replacement, Cyclone Filter: étape 3, image 1 de 2 Dyson DC39 Origin Cyclone Filter Replacement, Cyclone Filter: étape 3, image 2 de 2

    • Push down on the red button, located on top of the bin, to release the bottom section of the bin.

    Modifier

  5. Dyson DC39 Origin Cyclone Filter Replacement: étape 4, image 1 de 1

    • Push the grey button located in between the parts of the red lever to release the clear, bottom section of the bin.

    • The grey button can only be pressed after the bottom section is open.

    Modifier

  6. Dyson DC39 Origin Cyclone Filter Replacement: étape 5, image 1 de 3 Dyson DC39 Origin Cyclone Filter Replacement: étape 5, image 2 de 3 Dyson DC39 Origin Cyclone Filter Replacement: étape 5, image 3 de 3

    • You should notice several notches around the rim of the filter. Slide the plastic opening tool around the rim to release the notches.

    • After releasing all of the notches, pull the filter away from the orange cyclone assembly to remove it from the bin.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Sam Nelson

Membre depuis le 04/26/17

167 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team S23-G6, Livingston Spring 2017 Membre de l'équipe Cal Poly, Team S23-G6, Livingston Spring 2017

CPSU-LIVINGSTON-S17S23G6

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 10

30 derniers jours : 27

Total : 3,372