Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

This guide will show you how to open and replace the bin of your Dyson DC58.

  1. Make sure your vacuum is unplugged.
    • Make sure your vacuum is unplugged.

    • Avoid pressing the red trigger on the vacuum handle; this will power on the vacuum.

  2. Locate the red lever parallel to the red trigger and on the side of the clear bin.
    • Locate the red lever parallel to the red trigger and on the side of the clear bin.

  3. Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.
    • Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.

  4. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.
    • Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Ian Sloan

Membre depuis le 17/09/2015

146 Réputation

1 tutoriel rédigé

Équipe

CSU Fullerton, Team 2-4, Bruce Fall 2015 Membre de l'équipe CSU Fullerton, Team 2-4, Bruce Fall 2015

CSUF-BRUCE-F15S2G4

4 membres

12 tutoriels rédigés

The bin is stuck and won’t come off, although I have followed the directions above.

Marcy Altimano - Réponse

I think the reassembly instructions should be numbered “Step 5” and printed right below Step 4. They aren’t that easy to see.

Mary Miraglia - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 14

7 derniers jours : 44

30 derniers jours : 244

Total : 5,366