Réparez vos affaires Communauté Boutique

Dyson DC58 Cyclone Replacement

Ce dont vous avez besoin

  1. Dyson DC58 Cyclone Replacement, Bin: étape 1, image 1 de 1

    • Make sure your vacuum is unplugged.

    • Avoid pressing the red trigger on the vacuum handle; this will power on the vacuum.

    Modifier

  2. Dyson DC58 Cyclone Replacement: étape 2, image 1 de 1

    • Locate the red lever parallel to the red trigger and on the side of the clear bin.

    Modifier

  3. Dyson DC58 Cyclone Replacement: étape 3, image 1 de 1

    • Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.

    Modifier

  4. Dyson DC58 Cyclone Replacement: étape 4, image 1 de 2 Dyson DC58 Cyclone Replacement: étape 4, image 2 de 2

    • Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.

    Modifier

  6. Dyson DC58 Cyclone Replacement, Main Body: étape 5, image 1 de 1

    • Flip the vacuum over so that the silver cyclone part of the vacuum is now at the base.

    Modifier

  7. Dyson DC58 Cyclone Replacement: étape 6, image 1 de 2 Dyson DC58 Cyclone Replacement: étape 6, image 2 de 2

    • Locate the two visible white clips seen between the main body and the purple cyclone of the vacuum.

    • Use tweezers to pinch the two visible white clips together.

    • It may require a few tries to pinch the clips since the space between the main body and cyclone is small.

    Modifier

  8. Dyson DC58 Cyclone Replacement: étape 7, image 1 de 1

    • Tilt and pull the main body away from the purple cyclone of the vacuum.

    • You may hear a loud snap when the cyclone is released from the main body, this is to be expected.

    Modifier

  9. Dyson DC58 Cyclone Replacement, Cyclone: étape 8, image 1 de 2 Dyson DC58 Cyclone Replacement, Cyclone: étape 8, image 2 de 2

    • Use the metal spudger placed between the black rim and the purple rim to separate the purple screen cover from the cyclone body.

    • Pry all the way around the screen cover.

    Modifier

  10. Dyson DC58 Cyclone Replacement: étape 9, image 1 de 1

    • Use a T9 screw driver to remove the five 14mm screws around the edge of the cyclone body.

    Modifier

  11. Dyson DC58 Cyclone Replacement: étape 10, image 1 de 2 Dyson DC58 Cyclone Replacement: étape 10, image 2 de 2

    • Pull down on the black tube-like part of the silver cyclone body to remove it from the cyclone of the Dyson.

    • You may need to wiggle the tube as you are pulling down to loosen the pieces apart.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

19 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Herllaine Asistio

Membre depuis le 09/17/15

221 Réputation

1 tutoriel rédigé

Badges: 12

+ 9 badges supplémentaires

Équipe

CSU Fullerton, Team 2-4, Bruce Fall 2015 Membre de l'équipe CSU Fullerton, Team 2-4, Bruce Fall 2015

CSUF-BRUCE-F15S2G4

4 membres

19 tutoriels rédigés

11 commentaires

Great job, very useful thanks

Don - Réponse

Fantastic thanks!!!!

robh - Réponse

Very helpful indeed.

macx - Réponse

Thanks. Had to wash out the dog smell. This did the trick.

David Parsons - Réponse

Thanks. Had to wash out the dog smell. This did the trick when new filters wouldn't. Shame on Dyson for not making an easier to clean vacuum.

David Parsons - Réponse

At last I was able to clean behind the cyclone filter! Brick dust is the worst! I don’t mean to hoover it but just had the house remodeled so it’s everywhere. Thanks!

Vivian Ballantyne - Réponse

Thanks for this - the cyclone head on mine proved to be very dirty, meaning that the motor kept cutting out..

Peter Mutton - Réponse

Great job - Excellent - saved lots of dosh!

John Horne - Réponse

Hi

Run my Dyson handheld without the cyclone attached. Just the part with the motor and battery and cut out the same as everyone else’s on this stream. Saved me wasting my time cleaning it. How comes there is not a consumer program on Tv telling people to stay away from this type of expensive shoddy product.

Brian Williams - Réponse

Have done all this but the separated main body still cuts out every 2 seconds - just like previous comment from Brian.

I've wasted money on a battery replacement.

I'll have to buy a reliable European product instead

Is James Dyson still supporting Brexit?

Rick Canning - Réponse

I recently cleaned the vacuum body but I am not sure if water got into the motor …it’s turning on but no suctioning.Help me please? It’s not even a month old yet

May McCreath - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 26

30 derniers jours : 131

Total : 23,583