Dyson Pure Cool AM11 Power Cord Replacement

Introduction

This guide provides step-by-step instructions for disassembling the base and locating the power cord of the Dyson Pure Cool AM11. This teardown is useful for understanding the internal components of the power cord and can be helpful for troubleshooting or repair. Remember, this process should be approached with care to avoid damage to your device.

Ce dont vous avez besoin

Étape 1 Power Cord

Dyson Pure Cool AM11 Power Cord Replacement, Power Cord: étape 1, image 1 de 2

Dyson Pure Cool AM11 Power Cord Replacement, Power Cord: étape 1, image 2 de 2

Using a Phillips screwdriver, carefully remove the screws securing the base.

Modifier

Étape 2

Gently pry open the base.
Be cautious not to apply too much force.

Modifier

Étape 3

Inside the base, you'll find the power cord connected to the motherboard.

Modifier

Étape 4

Place the base back onto the device. Make sure it fits snugly.
Reinsert the previously removed screws and tighten them using the Phillips #00 screwdriver. Ensure they are tight, but do not over-tighten as this can damage the plastic.
Turn on your Dyson Pure Cool AM11 to ensure it's functioning correctly.