Aller au contenu principal

Introduction

In the case of a smelly device or loss of suction, a filter cleaning or replacement may help to maintain the Dyson V8 Absolute. It is important that the filters are cleaned frequently, at least once a month. The device contains a pre-filter and the HEPA filter. The HEPA filter, is filtering post cycled air through the device. The pre-filter is the initial filtering of debris suctioned.

Outils

Aucun outil spécifié.

  1. First, make sure the device is unplugged.
    • First, make sure the device is unplugged.

    • Pull the pre-filter up by the knob.

  2. Twist the HEPA filter to the left, matching up two black dots on the device and pulling away. Twist the HEPA filter to the left, matching up two black dots on the device and pulling away.
    • Twist the HEPA filter to the left, matching up two black dots on the device and pulling away.

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 autres ont terminé cette réparation.

Miranda Laberge

Membre depuis le 19/10/2017

610 Réputation

2 tutoriels rédigés

Équipe

UW Tacoma, Team S1-G5, Rose Fall 2017 Membre de l'équipe UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 membres

10 tutoriels rédigés

Un commentaire

You didn’t cover cleaning

Ric Riester - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 40

30 derniers jours : 153

Total : 19,263