Aller au contenu principal

EK3211 Kitchen Scale Disassembly

Ce dont vous avez besoin

  1. EK3211 Kitchen Scale Disassembly, Remove label to access screws: étape 1, image 1 de 1
    • Peel back the "ELECTRONIC KITCHEN SCALE" label to reveal two screws underneath.

  2. EK3211 Kitchen Scale Disassembly: étape 2, image 1 de 1
    • Use a #2 Phillips screwdriver to remove the two screws.

    • These screws are very tight and prone to strip.

  3. EK3211 Kitchen Scale Disassembly: étape 3, image 1 de 1
    • Remove the four screws holding the top veneer panel to the base.

  4. EK3211 Kitchen Scale Disassembly: étape 4, image 1 de 1
    • Remove the top veneer panel. It should come off without any force.

    • There are two small plastic clips on the edge below the screen, which must be inserted correctly during reassembly.

  5. EK3211 Kitchen Scale Disassembly: étape 5, image 1 de 1
    • Remove the screw holding the PCB and screen in place using a #1 Phillips screwdriver.

  6. EK3211 Kitchen Scale Disassembly: étape 6, image 1 de 1
    • Remove the PCB and screen assembly.

    • The buttons should also lift up with the rest of the PCB/screen assembly.

  7. EK3211 Kitchen Scale Disassembly: étape 7, image 1 de 1
    • Use a #1 Phillips screwdriver to remove the four screws holding the load cell mount to the base.

  8. EK3211 Kitchen Scale Disassembly: étape 8, image 1 de 1
    • Remove the two screws holding the load cell to the bracket using a #2 Phillips screwdriver.

  9. EK3211 Kitchen Scale Disassembly: étape 9, image 1 de 1
    • Separate the bracket from the load cell.

    • Be careful not to lose the spacer plate.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Steven Bell

Membre depuis le 08/27/20

493 Réputation

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 267