Aller au contenu principal

EasySMX ESM-9110 Turbo Button Replacement

Ce dont vous avez besoin

  1. EasySMX ESM-9110 Turbo Button Replacement, Handle Covers: étape 1, image 1 de 2 EasySMX ESM-9110 Turbo Button Replacement, Handle Covers: étape 1, image 2 de 2
    • Use a Phillips #000 screwdriver to remove the two 10 mm screws from the back of controller.

  2. EasySMX ESM-9110 Turbo Button Replacement: étape 2, image 1 de 1
    • Insert a plastic opening tool into the slit on the side of controller.

    • Wiggle the tool until the cover becomes loose.

    • Repeat this on the other side of Controller.

    • Go slow. Take your time removing the handle covers.

  3. EasySMX ESM-9110 Turbo Button Replacement: étape 3, image 1 de 1
    • Remove the faceplate.

    • Repeat on the other side of the controller.

  4. EasySMX ESM-9110 Turbo Button Replacement, Turbo Button: étape 4, image 1 de 3 EasySMX ESM-9110 Turbo Button Replacement, Turbo Button: étape 4, image 2 de 3 EasySMX ESM-9110 Turbo Button Replacement, Turbo Button: étape 4, image 3 de 3
    • Use a Philips #000 screwdriver to remove the six 20 mm screws from the controller's faceplate.

  5. EasySMX ESM-9110 Turbo Button Replacement: étape 5, image 1 de 3 EasySMX ESM-9110 Turbo Button Replacement: étape 5, image 2 de 3 EasySMX ESM-9110 Turbo Button Replacement: étape 5, image 3 de 3
    • Using a soldering iron, solder the turbo button.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Melanie Rodriguez

Membre depuis le 03/18/24

373 Réputation

4 tutoriels rédigés

Équipe

UMass Dartmouth, Team 2-4, Konn Spring 2024 Membre de l'équipe UMass Dartmouth, Team 2-4, Konn Spring 2024

UMASSD-KONN-S24S2G4

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 6

7 derniers jours : 6

30 derniers jours : 18

Total : 42