Aller au contenu principal

Introduction

Replacing the case is relatively simplistic and requires only the use of a screwdriver, plastic remover tools, and takes about 1 hour to complete.

Pièces

Aucune pièce spécifiée.

  1. Using the screwdriver with the J00 bit, remove the two 4.8 mm Phillips  screws. Use caution when removing the screws as they can strip easily. Use caution when removing the screws as they can strip easily.
    • Using the screwdriver with the J00 bit, remove the two 4.8 mm Phillips screws.

    • Use caution when removing the screws as they can strip easily.

  2. Using the small metal pry bar, remove the bottom plastic cover. Using your thumb, press down on the home button and hold the metal casing.  With your other hand hold the top plastic part of the device.  At the same time slide the metal casing and the plastic casing apart. On occasion the battery can become swollen and make this process difficult.  You might need to use the spudger to push on the bottom components to assist in the separation.
    • Using the small metal pry bar, remove the bottom plastic cover.

    • Using your thumb, press down on the home button and hold the metal casing. With your other hand hold the top plastic part of the device. At the same time slide the metal casing and the plastic casing apart.

    • On occasion the battery can become swollen and make this process difficult. You might need to use the spudger to push on the bottom components to assist in the separation.

  3. Using the screwdriver, remove the four 4.8 mm Phillips head  J00  screws at each corner of the motherboard. Remove the motherboard from the front plastic cover and screen. Install new plastic case following steps in reverse order
    • Using the screwdriver, remove the four 4.8 mm Phillips head J00 screws at each corner of the motherboard.

    • Remove the motherboard from the front plastic cover and screen.

    • Install new plastic case following steps in reverse order

Conclusion

To reassemble your device, follow these instructions in reverse order.

DELETED

Membre depuis le 13/10/2016

252 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team 2-1, Harley Fall 2016 Membre de l'équipe IUPUI, Team 2-1, Harley Fall 2016

IUPUI-HARLEY-F16S2G1

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 118