Aller au contenu principal

Eco X Gear Cone Replacement

Ce dont vous avez besoin

  1. Eco X Gear Cone Replacement, Frame: étape 1, image 1 de 1
    • Disconnect any power source and/or turn off device.

  2. Eco X Gear Cone Replacement: étape 2, image 1 de 1
    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

  3. Eco X Gear Cone Replacement: étape 3, image 1 de 1
    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

  4. Eco X Gear Cone Replacement: étape 4, image 1 de 1
    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

  5. Eco X Gear Cone Replacement, Cone: étape 5, image 1 de 1
    • Disconnect the wiring to improve accessibility to the cones.

  6. Eco X Gear Cone Replacement: étape 6, image 1 de 2 Eco X Gear Cone Replacement: étape 6, image 2 de 2
    • Remove the four screws which hold down the speaker. Then, pry up the speaker from the frame.

  7. Eco X Gear Cone Replacement: étape 7, image 1 de 1
    • To replace the cone, remove the existing one by peeling it off of the speaker with needle nose pliers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

James Lipsett

Membre depuis le 03/20/17

625 Réputation

6 tutoriels rédigés

Équipe

UMass Dartmouth, Team S9-G3, Martin Spring 2017 Membre de l'équipe UMass Dartmouth, Team S9-G3, Martin Spring 2017

UMASSD-MARTIN-S17S9G3

2 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 4

Total : 139