Réparez vos affaires Communauté Boutique

Eco X Gear LED Display Replacement

Introduction

You will need a phillips head screw driver, needle nose pliers, solder, and a soldering iron to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Ce dont vous avez besoin

  1. Eco X Gear LED Display Replacement, Frame: étape 1, image 1 de 1

    • Disconnect any power source and/or turn off device.

    Modifier

  2. Eco X Gear LED Display Replacement: étape 2, image 1 de 1

    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

    Modifier

  4. Eco X Gear LED Display Replacement: étape 3, image 1 de 1

    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

    Modifier

  5. Eco X Gear LED Display Replacement: étape 4, image 1 de 1

    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

    Modifier

  6. Eco X Gear LED Display Replacement, LED Display: étape 5, image 1 de 1

    • Locate the terminals coming off of the backside of the LED lights. Cut the terminals to remove the light from the frame.

    Modifier

  7. Eco X Gear LED Display Replacement: étape 6, image 1 de 1

    • Insert the new LED light into the frame. Use the solder and soldering iron to reconnect the terminals to the new lights.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

James Lipsett

Membre depuis le 03/20/17

625 Réputation

6 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

UMass Dartmouth, Team S9-G3, Martin Spring 2017 Membre de l'équipe UMass Dartmouth, Team S9-G3, Martin Spring 2017

UMASSD-MARTIN-S17S9G3

2 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 4

Total : 131