Réparez vos affaires Communauté Boutique

Ecovacs DEEBOT D35 Motherboard Replacement

Introduction

This guide can be used to replace the DEEBOT D35 motherboard. The Deebot D35 motherboard is responsible for controlling the vacuum's progress across floors. Special care must be taken when removing wires and the motherboard from the D35, as well as reassembly.

Ce dont vous avez besoin

  1. Ecovacs DEEBOT D35 Motherboard Replacement, Motherboard: étape 1, image 1 de 1

    • Flip the D35 onto its back.

    Modifier

  2. Ecovacs DEEBOT D35 Motherboard Replacement: étape 2, image 1 de 1

    • Remove the 9 screws with a PH2 Phillips screwdriver on the underside of the D35. The screws are:

    • 7 x 14mm screws

    • 2 x 10mm screws

    Modifier

  3. Ecovacs DEEBOT D35 Motherboard Replacement: étape 3, image 1 de 1

    • Use spudger or plastic opening tool to separate the Deebot backside

    Modifier

  5. Ecovacs DEEBOT D35 Motherboard Replacement: étape 4, image 1 de 1

    • Carefully lift the back cover from the body of the Deebot

    Modifier

  6. Ecovacs DEEBOT D35 Motherboard Replacement: étape 5, image 1 de 2 Ecovacs DEEBOT D35 Motherboard Replacement: étape 5, image 2 de 2

    • There are 5 cables that need to be carefully disconnected before completely disconnecting the back cover:

    • The 5 cables two blue cables on the front left and right side (located next to the sensor). Represented by the red arrows.

    • Multicolor ribbon in the front center. Represented by the blue arrow.

    • Two (black and red) two prong adapter connected to the motherboard. Represented by the green arrow.

    Modifier

  7. Ecovacs DEEBOT D35 Motherboard Replacement: étape 6, image 1 de 3 Ecovacs DEEBOT D35 Motherboard Replacement: étape 6, image 2 de 3 Ecovacs DEEBOT D35 Motherboard Replacement: étape 6, image 3 de 3

    • Locate the 3 screws on the motherboard:

    • 2 x 14mm screws

    • 1 x 10mm screws

    Modifier

  8. Ecovacs DEEBOT D35 Motherboard Replacement: étape 7, image 1 de 1

    • Remove the screws from the motherboard with a PH2 Phillips Head Screwdriver. The screws are:

    • 2 x 14mm screws

    • 1 x 10mm screws

    Modifier

  9. Ecovacs DEEBOT D35 Motherboard Replacement: étape 8, image 1 de 2 Ecovacs DEEBOT D35 Motherboard Replacement: étape 8, image 2 de 2

    • Locate and disconnect 12 cables bundles connected on the motherboard

    Modifier

  10. Ecovacs DEEBOT D35 Motherboard Replacement: étape 9, image 1 de 1

    • Carefully disconnect the motherboard from the Deebot body.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Kevin McKernan

Membre depuis le 02/15/17

107 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

Équipe

USF Tampa, Team 12-2, Eyestone Spring 2017 Membre de l'équipe USF Tampa, Team 12-2, Eyestone Spring 2017

USFT-EYESTONE-S17S12G2

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 8

Total : 2,709