Réparez vos affaires Communauté Boutique

Edwin the Duck Rubber Heart Power Button Replacement

Introduction

Edwin the Duck is an interactive learning toy. If Edwin is still charging but not turning on, this guide will help you step by step, on how to replace the power button.

Ce dont vous avez besoin

  1. Edwin the Duck Rubber Heart Power Button Replacement, Rubber Heart Power Button: étape 1, image 1 de 2 Edwin the Duck Rubber Heart Power Button Replacement, Rubber Heart Power Button: étape 1, image 2 de 2

    • Unscrew the four 9mm screws with a T8 bit

    • Remove the back plate off

    Modifier

  2. Edwin the Duck Rubber Heart Power Button Replacement: étape 2, image 1 de 2 Edwin the Duck Rubber Heart Power Button Replacement: étape 2, image 2 de 2

    • Carefully take off the rubber skin.

    • It's important to remember to be patient and not rush. You don't want to rip or damage the rubber skin in then resulting in not having a waterproof cover.

    Modifier

  3. Edwin the Duck Rubber Heart Power Button Replacement: étape 3, image 1 de 1

    • Using the J1 bit, unscrew all six 9 mm screws that run along the border.

    Modifier

  5. Edwin the Duck Rubber Heart Power Button Replacement: étape 4, image 1 de 2 Edwin the Duck Rubber Heart Power Button Replacement: étape 4, image 2 de 2

    • Use the plastic opening tool to open the inside of the duck.

    • Be very careful when splitting the two halves apart. There are wires connecting to both sides. Remember to open slowly.

    Modifier

  6. Edwin the Duck Rubber Heart Power Button Replacement: étape 5, image 1 de 2 Edwin the Duck Rubber Heart Power Button Replacement: étape 5, image 2 de 2

    • Using the plastic opening tool pull up the black tab up until it stops.

    • Be careful not to pull up the black tab too far up, otherwise the cable won't be secure anymore.

    • Pull up the white cable tab up slowly

    Modifier

  7. Edwin the Duck Rubber Heart Power Button Replacement: étape 6, image 1 de 2 Edwin the Duck Rubber Heart Power Button Replacement: étape 6, image 2 de 2

    • Use the J1 bit to unscrew all four 9 mm screws connected to the motherboard.

    • Use the J1 bit to unscrew both 9 mm screws attached to the white plastic plate

    Modifier

  8. Edwin the Duck Rubber Heart Power Button Replacement: étape 7, image 1 de 1

    • Lift up the motherboard and speaker and place it away and to the side like you see in the picture

    Modifier

  9. Edwin the Duck Rubber Heart Power Button Replacement: étape 8, image 1 de 2 Edwin the Duck Rubber Heart Power Button Replacement: étape 8, image 2 de 2

    • Unscrew the two black 9 mm screws by using the J1 bit.

    • Remove the damaged rubber heart button and replace with a new rubber heart button.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Michelle Montano

Membre depuis le 10/18/17

116 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

UW Tacoma, Team S1-G4, Rose Fall 2017 Membre de l'équipe UW Tacoma, Team S1-G4, Rose Fall 2017

UWT-ROSE-F17S1G4

4 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 5

Total : 703